4/6

Copper core PVC insulated copper tape shielded PVC sheathed control cable

This product is suitable for wiring control, signal, protection, and measurement systems with a rated voltage of 450/750V and below. It is installed indoors, in cable trenches, in pipelines, and underground.

Add WeChat

Hotline:

+86-400 0399 550

Hotline:

+86-198 6500 9392

Get a quote Contact us

Features
Standard
Parameter
Others

structural characteristics

• Conductor: Copper conductor, divided into Class 1 single stranded conductor and Class 2 7-wire composite conductor

• Insulation: PVC polyvinyl chloride

Electrical characteristics

• Rated voltage Uo/U: 450/750 V

Usage characteristics

• The maximum allowable long-term operating temperature for conductors is 70 ℃

• Maximum core temperature for short circuit (duration not exceeding 5 seconds): 160 ° C

• Operating temperature range: -20 ° C to 70 ° C

Installation features

• The ambient temperature during laying should not be lower than 0 ℃

• The bending radius during laying should not be less than 6 times the outer diameter of the cable

Applicable Standards:

GB/T9330-88 / IEC60227

Type: KVV

Conductor Material: Oxygen-free copper (Copper content: 99.99%)

Number of Cores: Multi-core

Insulation Material: PVC (Polyvinyl Chloride)

Rated Voltage: 450/750V

Max. Conductor Temperature: 105 ℃

Colors: Red, Yellow, Green, Blue, Black, Yellow-green

Type	Product Name	Number of Cable Cores	Cross-section (mm²)
KVV	Copper Core PVC Insulated PVC Sheathed Control Cable	2~61	1, 1.5, 2.5
		2~14	4, 6
		2~10	10

Delivery Length	Transportation
● Cables with weight less than 80kg may be delivered in coils. The length of each finished cable shall not be less than 100m, or delivered at any length agreed by both parties. ● Delivery at any length is acceptable upon agreement	● Cables shall be firmly fixed during transportation to prevent damage to cables or reels caused by collision or overturning. ● Avoid sharp bending and other mechanical damage. Cable reels shall not be placed flat. ● It is strictly prohibited to drop cable reels loaded with cables from heights during transportation. ● Special lifting equipment shall be used for cable hoisting. Horizontal lifting of reels or pushing cables down directly from height is forbidden.
Length Tolerance	Storage
● The length measurement error shall not exceed ±0.5%	● Finished cables shall be stored in an environment with temperature ranging from 0℃ to 40℃ and relative humidity below 85%. Keep away from direct sunlight and rain, with proper ventilation to maintain dry conditions.
Packaging	Installation Instructions
● Coiled or reeled cables shall be neatly wound and properly packed. Cable reels shall comply with JB/T 8137-1999. ● Cable ends shall be reliably sealed. Cable ends extending out of the reel shall be fitted with protective covers, with an extension length less than 300mm. ● Labels shall be attached to cable packages indicating: a) Manufacturer’s name and trademark b) Cable type and specification c) Rated voltage d) Length (m) e) Weight (kg) f) Manufacturing date g) Standard number or certification mark h) Symbol for the correct rotation direction of the cable reel	● The ambient temperature during installation shall not be lower than 0℃. If the measured ambient temperature is below 0℃, preheat the cable before installation. ● The bending radius during cable laying shall be strictly controlled to avoid internal mechanical damage to the cable. ● If man-made quality problems occur during cable laying (such as outer sheath damage), repair immediately or notify our after-sales service department.

Recommendations