4/6

Copper core PVC insulated steel tape armored PVC sheathed control cable

This product is suitable for wiring control, signal, protection, and measurement systems with a rated voltage of 450/750V or below. It can be installed indoors, in cable trenches, buried pipelines, and other fixed environments that can withstand significant mechanical external forces.

Add WeChat

Hotline:

+86-400 0399 550

Hotline:

+86-198 6500 9392

Get a quote Contact us

Features
Standard
Parameter
Others

structural characteristics

• Conductor: Copper conductor, divided into Class 1 single stranded conductor and Class 2 7-wire composite conductor

• Insulation: PVC polyvinyl chloride

Electrical characteristics

• Rated voltage Uo/U: 450/750 V

Usage characteristics

• The maximum allowable long-term operating temperature for conductors is 70 ℃

• Maximum core temperature for short circuit (duration not exceeding 5 seconds): 160 ° C

• Operating temperature range: -20 to 70 ° C

Installation features

• The ambient temperature during laying should not be lower than 0 ℃

• The bending radius during laying should not be less than 12 times the outer diameter of the cable

Execution standard:

GB9330-88 / IEC227

Model: KVV22

Conductor material: Oxygen free copper (copper content: 99.99%)

Number of cores: Multi core

Insulation material: PVC polyvinyl chloride

Rated voltage: 450/750V

Maximum temperature of conductor: 105 ℃

Colors: Red, Yellow, Green, Blue, Black

Number	Name	Cable cores	Cross-section（mm2）
KVV22	Copper core PVC insulated steel tape armored PVC sheathed control cable	7~61	1、1.5
		4~61	2.5
		4~14	4、6

Delivery length	Transportation
• Cables weighing less than 80kg are allowed to be packaged and delivered in loops, and each finished cable must not be less than 100m in length or any length agreed upon by both parties for delivery. • Allow delivery of any length according to the agreement	● During transportation, the cables must be securely fixed to prevent damage to the cables or reels caused by collisions or tipping over • To prevent severe bending and other mechanical damage, cable reels must not be laid flat. • It is strictly prohibited to throw cable reels containing cables from a height during transportation • Special lifting equipment shall be used for cable hoisting, and it is strictly prohibited to hang the cable reel horizontally or directly push the cable reel from a high altitude
Length error	Storage
• The length measurement error should not exceed ±0.5%	• Finished cables should be stored in an environment with a temperature between 0-40 ℃ and humidity below 85%, avoiding direct exposure to sunlight or rain. Adequate ventilation should be provided to maintain a dry environment.
Packaging	Installation Instructions
• Coiled or coiled cables should be neatly wound and properly packaged. The cable reel shall comply with the provisions of JB/T 8137-1999. • The cable ends should be reliably sealed, and protective covers should be added to the cable ends extending out of the tray, with an extension length of less than 300mm • Cable packaging should be accompanied by labels indicating： a) Manufacturer name and trademark b) Cable model and specifications c) Rated voltage d) Length (m) e) Weight (Kg) f) Manufacturing date g) Standard number or certification mark h) Symbol for correct rotation direction of cable reel	• During installation, the ambient temperature should not be lower than 0 ℃. If the thermometer tests that the ambient temperature is lower than 0 ℃, the cable should be preheated before installation; • The bending radius during cable laying should be strictly controlled to avoid mechanical damage inside the cable. • If any quality accidents are caused by human factors during the cable laying process (such as damage to the outer protective layer), they should be repaired immediately or the after-sales service department of our company should be notified

Recommendations